In order to use our 2024 OEM Navigation Map Updates, you need to install our Maps Converter software from the supplied USB memory stick

Average time to install: 10 minutes

Items supplied in this kit are:

Maps Converter Software on USB Memory Stick	2024 Map Update SD-Card

All work in this installation takes place inside the car and involves software running from the supplied USB memory stick and replacement of the existing OEM Navigation SD Card.

Map Chooser Software Install

To install the Maps Converter software, the software needs to be loaded via the car's entertainment unit:

a. Turn ON the car's ignition ON (DO NOT press the clutch / brake pedal and do NOT start the car)

b. Insert the supplied USB memory stick into one of the two USB ports in the center console (under the entertainment system)

c. The software will start running on it's own. You will then be presented with a number of screens, some with choices, as shown below:

d. Click YES - GO ON to continue installation. You will then see the following screens:

d. Click on FIAT to use Fiat (original) map updates; or click MAZDA to use our new 2024 map updates. PLEASE ENSURE YOU PICK MAZDA AT THIS STAGE.

e. The Maps Converter software will now switch the car to using MAZDA maps. Please be patient - this process takes a few minutes to complete.

f. Once the Map Conversion has completed, you will see the screen below. Please remove your existing Maps SD Card and insert the one supplied at this time.

g. Finally you will see some more screens informing you that the Map Conversion has completed. Please remove the USB memory stick when instructed and wait for the car's entertainment system to reboot.

You should now be able to use our latest 2024 Map SD-Card. Please open the Navigation application to ensure the system loads correctly.